Birch
The palest of our timbers — near-white, blond and almost grain-free, with a clean satin finish. Takes paint and pale stains flawlessly.
04 · Furniture
Furniture Parts
Hand-turned table legs, bed posts and decorative pieces — supplied to furniture makers, restorers and one-off commissions across the UK.
For the maker
Every furniture maker will find our furniture parts useful for any project — from Victorian dining tables to barley twist coffee tables, from four-poster bed sets to a single matching wardrobe finial.
We can turn from the daintiest 3″ post to the most majestic 5″ Victorian cross-post, in any timber, to any matching design — with bulk discounts available for trade orders.
The catalogue
From a single table leg
to a carved pilaster.
Four families of furniture turning.
01FamilyTable Legs
For furniture makers, restorers and bespoke commissions.
- Victorian dining table legs (4″)
- Slim-profile table legs (3″)
- Barley twist coffee table legs
- Side- and console-table legs
02FamilySolid Table Pedestals
A fast-growing favourite — hand-turned to your specification in our full range of timbers and sizes.
- Single-column dining pedestals
- Twin- and four-pillar bases
- Round, square and shaped feet
- Any size and timber to specification
03FamilyLaurel Crest Pilasters
Fluted columns crowned with carved acanthus capitals — classical structure with an organic flourish.
- Fluted shafts with acanthus-leaf capitals
- For fireplaces, cabinetry and entryways
- Supplied in matched, symmetrical pairs
- Any size and timber to specification
04FamilyKitchen Pilasters
Fluted half-columns that turn fitted kitchens and cabinetry into furniture — carved capital, fluted shaft and moulded plinth.
- Half- or full-depth, 10mm–200mm thick
- Carved capital, fluted shaft, moulded plinth
- Over 2m for tall larder units
- Painted or raw, in any timber
Matched room sets
A whole bedroom from a single design idea —
from the dressing table
to the table mirrors.
When the bed posts, dressing-table legs, stool turnings and mirror frames all share a single profile, the room reads as one considered piece — not a set of separate purchases. Send the design and we'll turn the whole set, by hand, in matching timber.
Sizing & specification
What we’ll need to know.
Table Legs
- Victorian
- 4″ square
- Slim profile
- 3″ square
- Coffee table
- Barley twist
- Bespoke
- Any size on request
Bed Posts
- Victorian cross-post
- 5″ square
- Slim contemporary
- 3″ square
- Half- and quarter-posts
- On request
- Bespoke
- Any height, any timber
No standard sizes. Any size, any profile, any timber — turned to your specification.
The figures above are the most-asked-for starting points, not a fixed menu — whatever the project, from a single replacement table leg to four hundred matching balusters, every piece is turned by hand to your spec and delivered UK-wide. Bulk discounts available for trade and furniture-maker orders.
Timbers
Endless timbers in stock.
Exotics on request.
Each spindle finished ready to paint, stain or oil.
Hard Maple
A Scandi-renovation favourite — light creamy-amber, exceptionally hard and even, with a tight, fine grain that turns crisply.
Pine
Warm honey-toned and softly grained — easy to work and quick to turn, a friendly mid-pale timber that stains evenly to mimic richer woods.
Beech
Common in 1930s semis — pale pinkish-cream flecked with tiny rays, clean and quietly modern. Dense, stable and steams to any shape.
American Oak
The workhorse of British staircases — light reddish-tan with a bold, open cathedral grain. Strong, characterful and suits period and modern homes alike.
Cherry
A warm reddish-brown that deepens beautifully with age — smooth, flowing grain and a refined, satin finish. A favourite for fine furniture turnings.
Sapele
A sustainable mahogany alternative — rich red-copper with a fine, ribbon-straight grain. A premium African hardwood for heirloom staircases and period restorations.
Walnut
The premium dark staircase — deep chocolate-brown with a flowing, characterful grain. Our richest, most luxurious timber.
And many more — we’ll turn your piece in any timber you can name.
These eight are the timbers we’re asked for most. Need ash, iroko, idigbo, tulipwood, a reclaimed beam or something more exotic? Name it and we’ll source and turn it to your specification.
Common questions
Furniture parts questions, answered.
We hand-turn furniture parts to order for makers, restorers and one-off commissions — table legs, bed posts, matched room sets and decorative turnings, in any timber, delivered UK-wide. Here are the questions makers ask most.
- What furniture parts do you turn?
- Table legs, bed posts, four-poster sets, dressing-table legs, stool turnings, chair spindles and decorative pieces — from a slim 3-inch profile to a majestic 5-inch Victorian cross-post, all hand-turned to order.
- Can you match a leg or post for a restoration?
- Yes. Send a photograph or the original piece and we turn a matching sample in matching timber for sign-off before any volume run — ideal for replacing a damaged or missing component.
- Can you make a whole matched room set?
- Yes. Bed posts, dressing-table legs, stool turnings and mirror frames can all share one profile, so a bedroom reads as a single considered piece rather than separate purchases.
- What sizes and timbers are available?
- Any size on request, in pine, oak, beech, maple, sapele, cherry, mahogany or other timbers. Every part is turned to your specification and matching design.
- Do you supply furniture makers and the trade?
- Yes. Furniture makers and restorers across the UK order from us, with bulk discounts for trade orders and UK-wide delivery. Pricing is by quotation.
Begin your furniture commission
A drawing, a photo, a sample.
Send what you have — a sketch, a photograph of an existing leg, or a piece off the original. We’ll match it, turn a sample for sign-off, and run the volume order in matching timber.